This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165:
a. Scrapers as defined in ISO 7133.
b. Dozers as described in ISO 6747.
c. Loaders as described in ISO 7131.
d. Graders as described in ISO 7134.
Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165:
Scrapers as defined in ISO 7133.
Dozers as described in ISO 6747.
Loaders as described in ISO 7131.
Graders as described in ISO 7134.
Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740.
User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023
CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...
Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023
Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023