Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Dropstandard by American Association

Provisional Standard Method of Test for Moisture Sensitivity Using Hydrostatic Pore Pressure to Determine Cohesion and Adhesion Strength of Compacted Asphalt Mixture

Standard Practice for Sampling Asphalt Mixtures after Compaction (Obtaining Cores)standard by American Association of State and Highway Transportation Officials, 2020

Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soilsstandard by American Association of State and Highway Transportation

Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (ASTM Designation C 136-06)standard by American Association of State and

Standard Practice for Digital Interchange of Geotechnical Datastandard by American Association of State and Highway Transportation Officials, 2020

Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete (ASTM Designation: A 722/A 722M-18)standard by American Association of State and Highway

Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application (ASTM A743/A743M-19)standard by American Association of State and Highway Transportation Officials,

Standard Recommended Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometerstandard by American Association of State and

Standard Method of Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)standard by American Association

Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (ASTM C506M-16b and C506-16b)standard by American Association of State and

Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concretestandard by American Association of State and Highway Transportation Officials, 2020