Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soilstandard by American Association of State and Highway Transportation Officials, 1994

Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Dropstandard by American Association

Provisional Standard Method of Test for Determining the Quality of Tack Coat Adhesion to the Surface of an Asphalt Pavement in the

Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortarstandard by American Association of State and

Standard Method of Test for Chemical Analysis of Hydraulic Cement [ASTM Designation: C 114-11a]standard by American Association of State and Highway Transportation

Standard Method of Test for Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactorstandard by

Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)standard by American Association of

Roadside Design Guide Chapter Six UpdateAmendment by American Association of State and Highway Transportation Officials, 02/01/2006

Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (ASTM Designation: C 305-06)standard by American

Standard Method of Test for Brinell Hardness of Metallic Materialsstandard by American Association of State and Highway Transportation Officials, 08/01/2008

Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damagestandard by American Association of State and Highway Transportation Officials,

Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatusstandard by American Association of State and Highway