Click here to purchase
This specification covers metric bolts and screws made of a low-alloy steel of the type identified under the Unified Numbering System as UNS G87400.Primarily for joining parts where minimum strengths of 860 MPa and 1000 MPa are required. Also, for joining parts where minimum shear strength of 516 MPa and 600 MPa are required.
User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023
CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...
Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023
Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023